Princeton Tec Apex Headlamp - $89.95

Free Shipping. Princeton Tec Apex Headlamp FEATURES of the Apex Headlamp by Princeton Tec Weight - 279 grams: Princeton Tec's advertised product weights always include batteries. For many products, battery weight is a large percentage of overall weight. Weight can be significantly reduced by using lithium batteries in lithium-compatible products. Waterproof - Level 2: Princeton Tec's intermediate rating, Level 2, is assigned to lights that offer a degree of water protection equivalent to IPX7 in the International Electrotechnical Commission (IEC) standards. Lights rated at Level 2 provide waterproof integrity down to 1 meter for up to 30 minutes. Multiple Modes: Multiple settings on many of our products give you the flexibility to adjust your light's brightness and/or beam width to illuminate greater distances or to conserve battery power, depending on your needs. Multiple Beams: This beam pattern combines focused narrow and focused wide beams to allow for the most versatility. At close range, the focused wide beams simulate normal daylight conditions so you can take advantage of your peripheral vision. The focused narrow beams create a long-throw spotlight ideal for night hiking and search and rescue. Maxbright LED: The highest quality LED available from Lumileds, Princeton Tec's Maxbright LED is extremely bright and efficient. This single LED emits a smooth, powerful, white light useful for a wide range of tasks. Princeton Tec uses collimators or reflectors with the Maxbright LED depending upon the application. Lumen 130: The light output of Princeton Tec lights is measured in lumens. A lumen is unit derived by the International System of Units (SI) for measuring light output. LED Optic Collimator: A collimator gathers all available light from an LED in the form of scattered rays and re-emits the light as parallel rays, making it more optically efficient than a standard reflector. Princeton Tec calibrates each collimator to the type of LED and application of each light. With proprietary optimized collimator / lens systems, Princeton Tec continues to advance LED technology. Heatsink Technology: Princeton Tec has developed proprietary ultralight heatsinks to protect LED products from overheating. Even though LEDs operate at much lower temperatures than traditional incandescent bulbs, they still generate heat. If this heat is not dissipated, the LED will suffer irreversible damage. By using heatsinks, Princeton Tec lights can burn at extre SPECIFICATIONS: Power: 200 Lumens Lamp: 4 Ultrabright LEDs, Maxbright LED Burn Time: up to 150 Hours Batteries: 4 AA Alkaline, Lithium or NiHM Rechargeable Weight: 279 Grams UL Rating Approved: Class I Division 2 Groups A, B, C and D Class II Division 2 Groups F and G UL Temp Code: T4 SPECIFICATIONS for 5mm Blink Setting: Burn Time: 20 Hours (regulated) Total Burn Time: 200 Hours Beam Length: 50 Meters Beam Pattern: Wide SPECIFICATIONS for 5mm High Setting: Burn Time: 8 Hours (regulated) Total Burn Time: 100 Hours Beam Length: 50 Meters Beam Pattern: Wide SPECIFICATIONS for 5mm Low Setting: Burn Time: 14 Hours (regulated) Total Burn Time: 150 Hours Beam Length: 30 Meters Beam Pattern: Wide SPECIFICATIONS for Maxbright High Setting: Burn Time: 0.5 Hours (regulated) Total Burn Time: 60 Hours Beam Length: 120 Meters Beam Pattern: Medium SPECIFICATIONS for Maxbright High Setting: Burn Time: 8 Hours (regulated) Total Burn Time: 96 Hours Beam Length: 70 Meters Beam Pattern: Medium - $89.95